Shower Wall Vapor Barrier Installation Video

Click Here For Available Products

CertainTeed MemBrain™...The Smart Vapor Retarder for walls.

Product Use: To be used behind concrete board walls in a shower area where moisture problems are a concern.


Benefit:  Easy to install! Staple to wood studs or caulk to steel studs. Overlap corners 4" - 6" and seam with vapor barrier tape. View Step 5 off the Installation Video


MemBrain™ Smart Vapor Retarder is a polyamide film that changes its permeability with the ambient humidity condition. The product's permeance is 1 perm or less when tested in accordance with ASTM E96, dry cup method, and increase to greater than 10 perms using the wet cup method. MemBrain™ allows closed building envelope systems to increase their drying potential with seasonal climate changes. With a high resistance to water vapor in winter or low humidity, MemBrain™ behaves like a moisture vapor barrier such as 6-mil polyethylene sheeting. With an increase in relative humidity, MemBrain™'s permeability increases dramatically, permitting drying to occur and decreasing moisture accumulation within the construction and the potential moisture damage.


This product can be used in place of traditional vapor retarders with unfaced fiber glass insulation, loose fill, or spray foam to provide an insulation system that is ideal in some of the more severe climate condition areas in terms of both temperature and humidity.


MemBrain™'s performance in rooms with short peaks of high humidity, such as bathrooms and kitchens, will not be affected because of the buffering action of interior finishes.

*Do not use low permeance interior finishes such as vinyl wallpaper or vapor retarding paints with MemBrain™. The drying benefits of MemBrain™will diminish with the use of low permeance finishes.

 
Top of Page